DENTCA Denture Base II for Carbon printers
Original Pink - 1 kg
The DENTCA Denture Base II resin is an FDA cleared biocompatible photocurable material. Performance and strength are the same as conventional acrylic.
In order to obtain the guaranteed results the DENTCA Denture Base II resin is to be used in conjunction with DENTCA Teeth resin for manufacture of 100% 3D printed removable dentures.
Available only in 1kg presentation
|Viscosity at 25 +/- 0.5 °C||cps||1000 < x < 2000|
|Density||g/cm3||1.05 < x < 1.20|
|Density||g/cm3||1.15 < x < 1.25|
|Degree of Conversion||%||>70|
For specific questions about your Carbon printer or Carbon software settings used for this resin, please contact Carbon directly at firstname.lastname@example.org
Material order handling time:
- Overnight and 2nd day shipping orders received before 11AM Pacific time will be shipped out on the same day.
- Orders received after 11AM Pacific time, it will be shipped out on the next business day.
- For ground shipping orders, please allow up to 2 business days before it is shipped out from our facility.